Measurement bridge — large
The measurement bridge made of anodised aluminium is suitable for dial gauges with 8 mm diameter (screw clamping). It can be used for measuring piston protrusion, cylinder liner protrusion, valve recess, and many other things.
- 3-way adjustable
- Internal spacing of the seating points: 94/134/174 mm
Scope of supply:
Measurement bridge in transparent plastic pull-out box
| Weight: | approx. 250 g |
| Package size: | 225 × 40 × 40 mm |
Measurement bridge – small
Measurement bridge for measuring the valve recess, for example.
Total length: 82 mm with a 8 mm locating hole for the dial gauge with screw clamping.
| Weight: | approx. 400 g |
| Package size: | 82 × 30 × 15 mm |
Bracket for dial gauge
Bracket for dial gauge for measuring e.g. the piston protrusion and cylinder liner protrusion.
Total length: 90 mm with a 8 mm locating hole for the dial gauge with screw clamping.
| Weight: | approx. 400 g |
| Package size: | 85 × 85 × 105 mm |
Dial gauge
- Metal housing and outer ring
- Measuring range: 0– 10 mm
- Smallest reading: 0.01 mm
- For locating holes with a diameter of 8 mm
Scope of supply:
dial gauge in a plastic box
| Weight: | approx. 200 g |
| Package size: | 160 × 80 × 60 mm |
Feeler gauge
The feeler gauge is suitable for measuring the valve clearance, ring joint clearance on piston rings and for many other applications.
- Measuring range: 0.05 – 1.00 mm
- Blade length: 100 mm
Scope of supply:
feeler gauge with 13 blades and nickelplated shell in a transparent plastic pull-out box
| Weight: | approx. 80 g |
| Package size: | 105 × 20 × 20 mm |
Long feeler gauge
The long version of the feeler gauge is suitable for measuring the valve clearance, ring joint clearance on piston rings and for many other applications.
- Measuring range: 0.1 – 0.6 mm
- Blade length: 200 mm
Scope of supply:
feeler gauge with 11 blades on a ring in a transparent plastic pull-out box
| Weight: | approx. 80 g |
| Package size: | 205 × 20 × 20 mm |
Conical feeler gauge
The conical feeler gauge is a precision measuring tool for determining the ring joint clearance on piston rings and for measuring other distances and gap dimensions.
- Measuring range: 0.12 – 1.0 mm
- Reading accuracy: 0.01 mm
Scope of supply:
feeler gauge (conical) made from stainless steel in pull-out box made from transparent plastic
| Weight: | approx. 30 g |
| Package size: | 200 × 20 × 1 mm |
PLASTIC GAUGE engine bearing measuring strip
The PLASTIC GAUGE measuring strip enables a simple but accurate measurement of bearing clearances and gap dimensions. Areas of application include crankshaft and connecting rod bearings as well as situations in which a feeler gauge cannot be used.
Application:
The measuring strips are placed on the shaft across the sliding surface. The bearing caps are put in place and secured with the prescribed tightening torques. After the bearing caps are removed, the bearing clearance can be determined from the thickness of the measuring strips using the measuring scale.
Further application possibilities:
Determining unevenness on cylinder head sealing faces and flange connections.
Measuring range:
- 0.025 – 0.175 mm /
- 0.001 – 0.007 inch
Scope of supply:
10 × measuring strips, measuring instructions and measuring scale in transparent plastic pull-out box
| Weight: | approx. 30 g |
| Package size: | 150 × 42 × 20 mm |
Calliper
High-grade calliper with rapid adjustment, cross tips and flat depth measuring stick made from stainless, hardened steel – with matt chromium-plated scale and vernier. Suitable for outside, inside, step and depth measurement.
- Measuring range: 0 – 150 mm
- Jaw length: 40 mm
- Display in mm and inches
- Vernier 1/20 mm or 1/128 inches
Scope of supply:
calliper in leather-look bag
| Weight: | approx. 240 g |
| Package size: | approx. 260 × 95 × 15 mm |
Calliper with dial gauge
Precision calliper with dial gauge, drive roller, cross tips and flat depth measuring stick made from stainless, hardened steel. The scale dial is matt chromium-plated, the toothing is hardened and precisionground, the scale dial is rotatable. Suitable for high-precision outside, inside, step and depth measurements.
- Measuring range: 0 – 150 mm
- Reading accuracy: 0.01 mm
- Jaw length: 40 mm
- With fixing screw
Scope of supply:
calliper in sturdy plastic case
| Weight: | approx. 300 g |
| Package size: | approx. 250 × 90 × 28 mm |
Digital calliper
The digital calliper is extremely easy to operate and impresses with outstanding measuring accuracy.
Technical data and equipment:
- 5-digit LC display
- Measuring range of 0 – 150 mm/6 inches
- Measuring unit selectable in mm/inches
- Resolution 0.01 mm/0.0005 inch
- Zerosetting key
- Instantaneous readout
- Fixing screw
- Rapid adjustment
- Cross tips for inside measurement
- Offset jaw ends for core measurement
- Depth gauge
- Thread dimension table on the rear
- Data output
- Made of high-grade stainless tool steel, chromium-plated
Scope of supply:
digital calliper incl. battery in a sturdy plastic case.
| Weight: | approx. 300 g |
| Package size: | approx. 250 × 90 × 28 mm |
Hardness tester
Precision hardness tester (sclerometer) for hardness testing on all surface-hardened components.
Application example:
For checking the hardness of journals in crankshafts. Based on the hardness values determined by the measurement, the condition and reusability of crankshafts can be assessed.
The drop hammer is allowed to fall vertically onto the surface to be tested and then rebounds. At the highest rebound point the hammer is held by a safety catch. The rebound value can be read out from the scale and converted to HB/HV/HRC and tensile strength using the table.
Scope of supply:
Rebound hardness tester in nickel-plated version, conversion chart, quality wood case.
| Weight incl. package: | 500 g |
| Package size: | 200 × 80 × 32 mm |